
16
Clear Resettable Data Log
Once the Clear Resettable Data Log button has been
selected, a dialog box will open asking the user if they
want to save the resettable data log before clearing it?
If the user selects Yes, a dialogue box will open asking
the user to input the mileage and VIN.
Figure 55
Figure 56
Then the data log report will be created and the user
will be asked if they want to: Print, Print Preview, Email
to Bendix or Save.
If the user selected No to saving the report before it is
cleared or after the report created ACom Diagnostics
will clear the resettable data log.
Figure 57
A dialogue box will open and confi rm the resettable
data log fi le was cleared.
Figure 58
BW2668 ©2009 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • 5/09 • All Rights Reserved
Known Issues with ACom
™
Diagnostics 6.3
• Installation Test under Customize, RPM units are
able to be selected but ACom
™
Diagnostics will only
display units in MPH
• TABS-6 ADV MC Service Data Sheet may not be
available. Check www.bendix.com.
• TABS-6 MV MC Service Data Sheet is not available.
Check www.bendix.com.
• When loading a *.DPV fi le, the load button allows
the technician to select the fi le to be written, but the
Write button needs to be selected to actually write
the *.DPV fi le into the ECU.
• A corrupt or invalid *.DPV fi le can not be saved by
the ACom
™
software.
• Sometimes the scratchpad write function does not
always complete
• Confi guration pictures always display two axles
• Lift Axle confi guration pictures are not included
• ACom
™
Diagnostics icon is not removed with an
un-install with a desktop refresh
• PLC Communication issues could be experienced
with TABS-6 ADV MC products and TABS-6 MV
MC products
• ACom
™
Diagnostics may run slowly on slower
CPUs
• Windows 2000 operation with ACom
™
Diagnostics
may not be robust or stable
Commenti su questo manuale