BENDIX MC-30 TRAILER ABS CONTROLLER Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 13)

13

CHART 7 - EC-30

™

CONTROLLER BLINK CODE DEFINITIONS (3 of 3)

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Commenti su questo manuale

Nessun commento